مشروع جهاز فحص الكهرباء بدون توصيل

Non-Contact Voltage Detector

فيديو شرح لمشروع فاحص الكهرباء عن بعد

خطوات تنفيذ جهاز الفاحص :
1. Prepare the Perf Board
2. Label the Perf Board, Insert the Transistors
3. Solder & Bend the Transistors
4. Insert and Solder the Resistors
5. Wire the LED
6. Connect one wire from the push button switch
7. Finish wiring the switch and battery clip
8. Prepare the copper pad wire
9. Prepare the enclosure cover
10. Drill the enclosure lid holes and mount push button
11. Mount the LED holder and LED
12. Cut & mount the copper strip
13. Drill hole for green wire and solder to pad
14. Put everything into the enclosure
15. Usage